+1 vote
223 views
in DTG by (1.7k points)
By buying a DTGPRO printer, you acknowledge that you have read and understand the below contents and are in agreement with the DTG PRO terms and conditions.
 
TERMS AND CONDITIONS:
  • Before Buying a DTG Printer – what you should know
  • What You Will Need (not included in your purchase)
  • Customer Responsibilities
  • Limited Warranty
 
Before buying a DTG printer
A DTG printer will print amazing full color prints on light and dark shirts in just a few minutes. You can be doing short runs with no setups, no color separations, no tear down - and you are getting more than wholesale for a shirt – you will love it!
There is a learning curve to DTG printing (much like screen printing or other forms of printing).  It takes time and experimentation to become proficient and knowledgeable about this new craft.
The secret to DTG success is proper printer maintenance and proper pretreatment of the garment:
  • Proper Printer Maintenance takes 5-10 mins, details are included in our instruction manuals (print nozzle test / print head cleaning / wet capping)
  • Proper Pretreatment is necessary especially for printing with white ink to dark garments (separate pre-treatment hand sprayer or automatic sprayer are needed, as well as heat press)
You may have to work on and troubleshoot your printer at some point. Between user error and just the effects of use over time you may encounter errors and will learn to fix them, with DTG PRO’s assistance.
You may need to climate control your print room. DTG works best in 70 -75 degrees and humidity from 40% - 60%. (50% + is needed at times). A humidifier may be needed if you have unusually low humidity in your environment.
Inks will clog if not used often, especially if the printer is left idle more than 1-2 days or proper maintenance is not conducted. There are many unclogging procedures available to you (including the printer’s self-cleaning function, and a more forceful manual flush with our included flush system).
Never take customer orders until you have learned how to use the printer and pretreatment.
Every day that you use the printer you will need to do Maintenance. A routine of 5-10 minutes of cleaning the printer prior to using, is easy and quick.
Join a community of users, such as online user groups and forums for T-shirt printing. You will learn and share knowledge that will be valuable to you and your business.
Ensure you have RIP software (such as Kothari, AcroRIP, PartnerRIP etc.) if none is provided with your purchase.
 
What you will need (not included in your purchase):
  • Windows 7 or higher Computer (PC) with an available USB port. Artwork design software like Gimp, Adobe Photoshop, Adobe Illustrator or CorelDRAW
  • RIP Software (if not already included in your purchase) and RIP software training or support. We do not support RIP software, we only have the ability to share what other users are having success with.
  • Heat press for curing the pretreatment and final print. We recommend a 16x20 inch press.
  • Wagner Hand Sprayer or Automatic pretreat machine to apply pretreatment, required for printing with white ink to dark garments
  • A Humidifier to keep the humidity above 40% in the print room, if you have low humidity in your room / environment
 
Customer Responsibilities
Your responsibilities include:
• Provide a clean and climate friendly work space to print in.
Humidity of 40% - 70% and temperatures of 70 – 75 degrees Fahrenheit must be maintained at all times while ink is installed in printer. Failure to keep these tolerances may cause clogging and other issues that will then require extensive cleaning measures.
• Understanding that inks are water-based textile inks and will clog the Printheads if the machine is left unused for more than 1-2 days (and the humidity/temperature climate is not optimal).
Clogging is nothing to be scared of, if it occurs, you can resolve the clogs via a number of simple procedures (such as utilizing the cleaning function on the printer, or for a more advanced clean, you could flush the printheads with our provided flush system).
To avoid and/or resolve clogs, you need to perform daily / weekly maintenance, and/or print frequently to keep the ink flowing.  Maintenance takes 5 mins a day and can be part of your daily standard operating procedures.


• Understand and acknowledge that Printheads, Capping stations, and any other items that come in contact with ink and/or are subject to wear and tear or consumable are not covered under our warranty.
• Use DTG PRO printer approved inks, supplies, and equipment to achieve results claimed.
• Retain shipping crate or original packaging for 30-90 days and until no longer needed.
• Agree to perform simple daily and weekly maintenance, including keeping print heads and
capping stations cleaned.
• Apply all pretreatment in a separate room isolated from the printer Printhead and other sensitive parts.
• Agree and understand that that DTG PRO printers are built to order, sales are final and no returns or refunds are permitted. All issues must be remedied per warranty.
• Customer may be required to do troubleshooting and repairs with DTG PRO’s help and direction.
 
 
Limited Warranty
DTG PRO warrants the DTG PRO direct-to-garment inkjet printer (“unit”) to be free from defects in workmanship and materials (warranty does not include printing head, ink cartridges or capping station which are subject to wear and tear and/or consumable over time).
The warranty is valid for a period of one year from date of purchase for parts and labor provided that the unit is properly maintained and operated under normal use. This warranty does not authorize any on-site repair and is considered to be a “depot” warranty which requires that the unit or defective part must be returned freight prepaid to DTG PRO in Irwindale CA for repair.
Replacement parts such as print heads are available from either DTG PRO and/or various alternative suppliers.
Should a return for repair be necessary, DTG PRO will provide assistance locating an approved shipping company. The unit must be insured for the full retail value. If the unit is shipped by a non-approved company or is not in original packaging when it arrives, DTG PRO reserves the right to refuse the shipment. These steps eliminate potential for damage in shipping.
Although every effort has been made to provide accurate specifications, DTG PRO does not assume any liability for damages, whether consequential or incidental, that may result from the use or misuse of this product or from damage caused by unit modifications made by the user.
DTG PRO reserves the right to alter specifications in the manufacture of its products.
It is understood and agreed that DTG PRO ’s liability in contract, in tort, under any warranty, in negligence, in strict liability or otherwise shall not exceed the return of the amount of the purchased price paid by Buyer. Not withstanding the foregoing provision, under no circumstances shall DTG PRO be liable for special, indirect or consequential damages (including loss of profit).
The price stated for the equipment is a consideration in limiting DTG PRO ’s liability. No action regardless of form, arising out of the transactions under this Agreement may be brought by Buyer more than two (2) years after the cause of action has occurred. Our warranty as specified is exclusive and no other warranty, whether written or oral, is expressed or implied. DTG PRO specifically disclaims the implied warranties of merchantability and fitness for a particular purpose.
This warranty initiates from date of shipment to original customer. It is non-transferable.
This warranty does not extend to the print head or expendable parts such as dampers. This warranty does not cover a unit that has been subject to misuse, neglect, negligence, accident, or unit that has been operated in any way contrary to the manual and operating procedures specified by DTG PRO.

This warranty does not apply to damage resulting from improper maintenance, lack of proof of maintenance as outlined by DTG PRO, improper shipping, damage caused by disasters, such as fire, flood, and lightning, improper electrical current, software problems, interaction with non-DTG PRO products, or service other than by DTG PRO .
Written authorization must be obtained from DTG PRO before any unit or part will be accepted.
Replacement parts are sent out via standard freight carriers such as UPS / FEDEX / USPS. Parts sent out prior to receiving a defective Unit or part from the customer will be sent C.O.D., cost plus freight. Upon return of defective part, if it is deemed that the part was not damaged by customer but failed, the cost of the replacement part will be refunded.
THE WARRANTY AND REMEDY PROVIDED ABOVE ARE EXCLUSIVE AND IN LIEU OF
ALL OTHER EXPRESS OR IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY, NON- INFRINGEMENT OR FITNESS
FOR A PARTICULAR PURPOSE. SOME LAWS DO NOT ALLOW THE EXCLUSION OF
IMPLIED WARRANTIES. IF THESE LAWS APPLY, THEN ALL EXPRESS AND IMPLIED
WARRANTIES ARE LIMITED TO THE WARRANTY PERIOD IDENTIFIED ABOVE. UNLESS
STATED HEREIN, ANY STATEMENT OR REPRESENTATIONS MADE BY ANY OTHER
PERSON OR FIRM ARE VOID. IN THE EVENT THE REMEDIES ABOVE FAIL, DTG PRO ’S
ENTIRE LIABILITY SHALL BE LIMITED TO A REFUND OF THE PRICE PAID FOR THE
PRODUCT COVERED BY THIS LIMITED WARRANTY. EXCEPT AS PROVIDED IN THIS
WRITTEN WARRANTY, NEITHER DTG PRO NOR ITS AGENTS SHALL BE LIABLE FOR ANY
LOSS, INCONVENIENCE, OR DAMAGE, INCLUDING DIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES, RESULTING FROM THE USE OR INABILITY TO USE THIS
PRODUCT, WHETHER RESULTING FROM BREACH OF WARRANTY OR ANY OTHER
LEGAL THEORY.
 
 

Your answer

Your name to display (optional):
Privacy: Your email address will only be used for sending these notifications.
Anti-spam verification:
What is the color of the sky?
To avoid this verification in future, please log in or register.

462 questions

447 answers

21 comments

909 users

Welcome to the DTGPRO Q&A, where you can ask questions relating to DTG printers, DTF Printers, textile ink and toners, and receive answers from other members of the community.

Categories

...