After applying the powder, the film is carefully placed inside a curing oven to melt the powder. Powder melting points usually range between 284 - 338℉ depending on different factors. Once melted, the powder becomes an adhesive that allows the design to stick to the garment. A heat press will also work if you don’t have a curing oven. Just be sure not to press it down onto the film by leaving a ⅛” - ¼” gap between the film and the heat press’ top plate. - applying heat without touching the film. Once your powder is melted, apply your transfer to your garment and press. Each film and powder is different but premium matte hot peel film and Premium powder, it is recommended to heat press at about 280 degrees with 12 seconds with medium/heavy pressure, peeling immediately after.